First, LED street lamp wiring harness processing fork poor reasons:

① The fork cutter is worn or the fork opener screw is not locked;

② The tool is not suitable or the device is improper;

③ The material of the wire is deformed, and the wire is tilted in the slot.

Second, LED street lamp wiring harness processing poor peeling reasons:

① The distance between the peeling knives is too wide;

② The cutting tool is sharp and dull, and the copper wire is scraped during production, while the peeling is poor;

③ The manipulator is too loose;

④ The moving gear of the tool holder has debris.

Third, LED street lamp wiring harness processing copper wire scraping reason:

① The tool is not parallel or the tool distance is too small;

② The fork pressure is too deep;

③ The copper sleeve of the gear at the cut part is worn.

Fourth, LED street lamp wiring harness processing total length out of reason:

① manipulator clamp debugging is not parallel;

② The clamping force of the manipulator clamp is not enough;

③ The manipulator is not operating normally or the over-the-line device is improper.